Replacement Electric Motors From Goodwinch Including Bowmotors ‘1’ & ‘2’
Why not treat your winch to a new motor, either the same or similar, or one with a greater power output. We also suggest that you replace the solenoids at the same time which are probably tired as well. Again, you have a choice between the standard EP/TDS sealed solenoids and the Albright special heavy duty protected solenoids. The fitting of more powerful motors may require the use of a larger diameter wire rope or even better, use the much safer and lighter Dyneema® Bowrope.
| MAKE | VOLTS | SIZE | SPEED RPM | HP | NO. LOAD AMPS | WINCH | OUR PRICE |
|---|---|---|---|---|---|---|---|
| ISKRA | 12 | Short Series 150 x 112mm | 4000 | 4.2 | 65 | Standard X9 | £159 |
| ISKRA | 12 | Long Series 179 x 112mm | 2800 | 4.2 | 47 | X9 Plus, G10, Husky, some Warn and Ramsey | £159 |
| ISKRA | 24 | Long Series 179 x 112mm | 2800 | 4.6 | 24 | X9 Plus, G10, Husky, some Warn and Ramsey | £179 |
| BOWMOTOR 1 | 12 | Long Series 175 x 112mm | 4000 | 5.6 | 44 | TDS, EP, X9 Plus, X9 Special Edition,G10, G12,some Warn and Ramsey | £159 |
| BOWMOTOR 1 | 24 | Long Series 175 x 112mm | 4000 | 5.6 | 23 | TDS, EP, X9 Plus, X9 Special Edition,G10, G12,some Warn and Ramsey | £159 |
| BOWMOTOR 2 | 12 | Extra Long Series 196 x 112mm | 5000 | 6.8 | 55 | TDS (where space allows), Warn 8274 & Gigglepin twin motored winches | £199 |
| BOWMOTOR 2 | 24 | Extra Long Series 196 x 112mm | 5000 | 6.8 | 29 | TDS (where space allows), Warn 8274 & Gigglepin twin motored winches | £199 |
Bowmotors are available in both 4,000 & 5000 rpm. They feature heavy duty copper armature windings, which are copper welded to the commutator, with highly efficient ball bearings at each end. Four enormous long lasting brushes enable the motor to run cooler.
-
- ISKRA Short Series
-
- ISKRA Long Series
-
- Bowmotor Heavy Duty Brush Gear
-
- Bowmotor 1 and Bowmotor 2 compared
REPLACEMENT SOLENOIDS
If you are renewing an existing winch, we can make up for you all the heavy duty cables that you need using 35mm2 copper fitted with double crimped 6, 8 or 10mm terminal ends at £1.83 per foot (£6.00 per metre)
